Fix: iPad Multitasking support requires these orientations in Xcode

Fix: iPad Multitasking support requires these orientations in Xcode

Written by

in

Quick answer: This Invalid Bundle error means your iPad app supports multitasking but doesn’t declare all four orientations. Fix it by either checking Requires Full Screen under General > Targets to opt out of multitasking, or by adding all four orientations to UISupportedInterfaceOrientations~ipad.

When you try to upload or submit a universal app built with Xcode 7 or later, validation can fail with:

Invalid Bundle. iPad Multitasking support requires these orientations: 'UIInterfaceOrientationPortrait,UIInterfaceOrientationPortraitUpsideDown,UIInterfaceOrientationLandscapeLeft,UIInterfaceOrientationLandscapeRight'. Found 'UIInterfaceOrientationPortrait,UIInterfaceOrientationPortraitUpsideDown' in bundle 'com.example.YourApp'

The bundle identifier in the message will be yours. The list of found orientations may also vary, but the cause is the same.

Why this happens

Starting with iOS 9, iPad supports multitasking with Slide Over and Split View. In these modes the system can put your app side-by-side with another app and resize it to 1/3, 1/2, or 2/3 of the screen width. To do that reliably, the system needs your app to be able to lay out in any orientation and any size.

By default, any app that is built with the iOS 9 SDK or later and runs on iPad is considered multitasking-capable. Apple enforces this at App Store validation time: if multitasking is enabled, your Info.plist must declare support for all four interface orientations on iPad:

  • UIInterfaceOrientationPortrait
  • UIInterfaceOrientationPortraitUpsideDown
  • UIInterfaceOrientationLandscapeLeft
  • UIInterfaceOrientationLandscapeRight

If your app only declares portrait orientations, or only landscape, validation fails with the error above. This is common for universal apps where iPhone is portrait-only. Xcode lets you set orientations separately for iPhone and iPad, but if you only edited the base UISupportedInterfaceOrientations key or only checked Portrait in Deployment Info, the iPad variant inherits the same limited set and triggers the error.

The two Info.plist keys involved are:

  • UISupportedInterfaceOrientations – the default orientations for iPhone
  • UISupportedInterfaceOrientations~ipad – the iPad-specific override, if present
  • UIRequiresFullScreen – a Boolean that opts the app out of multitasking entirely

If UIRequiresFullScreen is missing or set to NO, the App Store expects all four iPad orientations. If it is set to YES, the requirement is waived and your app always runs full screen.

How to fix it

Decide first: do you want to support iPad multitasking, or do you need your app to stay full screen?

If your layout only works in portrait, opt out. If you can adapt your layout to any size, add the missing orientations and keep multitasking enabled.

1. Opt out of iPad multitasking with Requires Full Screen

This is the fix from the accepted solution and the right choice if your iPad UI does not support landscape or cannot be resized.

Option A – Using the Xcode checkbox (recommended):

  1. Open your project in Xcode.
  2. Select the project in the Project navigator, then select your app target under Targets.
  3. Go to the General tab.
  4. Under Deployment Info, find the Requires Full Screen checkbox and check it.
  5. This automatically sets UIRequiresFullScreen to YES in your Info.plist.

Option B – Editing Info.plist directly:

  1. Open Info.plist as Source Code (right-click > Open As > Source Code).
  2. Add this key inside the top-level <dict>:
<key>UIRequiresFullScreen</key>
<true/>
  1. If you already have the key with <false/>, change it to <true/>.

  2. Save, clean the build folder with Product > Clean Build Folder, then create a new Archive with Product > Archive.

After this change, validation no longer requires all four orientations. Your app will run full screen on iPad and will not appear in Split View or Slide Over. On iPhone there is no effect.

2. Keep multitasking and add all four iPad orientations

Choose this if you want your app to work in Split View, Slide Over, and Stage Manager. You must make your layout adaptive, but you get the modern iPad experience.

Option A – Using Xcode Deployment Info:

  1. Select your target > General > Deployment Info.
  2. Make sure Devices is set to Universal or iPad.
  3. Under Device Orientation, check all four boxes: Portrait, Upside Down, Landscape Left, and Landscape Right.
  4. If you want iPhone to stay portrait-only, you need separate settings. Xcode creates UISupportedInterfaceOrientations~ipad for iPad when you use the iPad-specific orientation controls. Verify it in Info.plist.

Option B – Editing Info.plist directly:

You can keep iPhone portrait-only while allowing all orientations on iPad. Your Info.plist should contain both keys:

<key>UISupportedInterfaceOrientations</key>
<array>
    <string>UIInterfaceOrientationPortrait</string>
    <string>UIInterfaceOrientationPortraitUpsideDown</string>
</array>
<key>UISupportedInterfaceOrientations~ipad</key>
<array>
    <string>UIInterfaceOrientationPortrait</string>
    <string>UIInterfaceOrientationPortraitUpsideDown</string>
    <string>UIInterfaceOrientationLandscapeLeft</string>
    <string>UIInterfaceOrientationLandscapeRight</string>
</array>
<key>UIRequiresFullScreen</key>
<false/>

If you want multitasking, UIRequiresFullScreen must be NO or absent. Do not set it to YES in this case.

After adding the orientations, test on an iPad simulator. Open your app, then swipe from the right edge or use the multitasking button at the top to enter Split View. Rotate the device with Features > Rotate and resize the divider. Fix any layout constraints that break before you resubmit.

3. Verify and resubmit

  1. Clean the build folder: Product > Clean Build Folder.
  2. Bump the build number in General > Identity if you previously uploaded the same version.
  3. Create a new archive: Product > Archive.
  4. In the Organizer, click Validate App first. The iPad Multitasking support requires these orientations error should be gone.
  5. Click Distribute App or Upload to App Store and submit for review again in App Store Connect.

If the error persists, open the built .ipa or the archive’s Info.plist and confirm the keys. A common mistake is editing the wrong target or a different Info.plist file when the project has multiple targets or extensions.

How to prevent it

  • Decide your iPad multitasking strategy at the start of a project. If you need portrait-only, enable Requires Full Screen immediately.
  • Use UISupportedInterfaceOrientations~ipad to keep iPhone and iPad orientations independent in universal apps. Do not rely on a single UISupportedInterfaceOrientations array for both.
  • Test every iPad build with Split View and all four rotations on a simulator before archiving.
  • Validate the archive locally in Xcode Organizer before uploading to App Store Connect. Validation catches this error faster than waiting for the upload to fail.
  • If you use multiple targets, extensions, or a watch app, check that each target’s Info.plist has the correct orientation and full-screen settings.

FAQ

Does UIRequiresFullScreen affect iPhone?

No. UIRequiresFullScreen only affects iPad multitasking. On iPhone the app always runs full screen regardless of this setting. You can safely set it to YES to keep a portrait-only iPad app while leaving iPhone behavior unchanged.

Can I support Split View with only two orientations?

No. If multitasking is enabled (UIRequiresFullScreen is NO or missing), App Store validation requires all four iPad orientations. There is no supported way to enable Split View for only portrait or only landscape. You must either support all four or opt out entirely.

Will Apple reject my app if I opt out of multitasking with Requires Full Screen?

No. Opting out is allowed and documented by Apple. Your app will simply not support Split View, Slide Over, or Stage Manager multitasking and will always launch full screen. Apple will not reject for this alone, but you should ensure your app still handles all device sizes well when full screen.

Sources & credits

Parts of this guide are adapted from content licensed under CC BY-SA 4.0; this article is shared under the same license.